no bar  /  Anatomy

Bolshoy Matryoshka Exclusive

No. 1 · SVG · Rising bar cabinet

Matryoshka exclusive

A cabinet in black leather and satin bronze, its front cut away on the left to show the lift. Turn the key and the whole bar rises 820 mm out of the body on two column guides in the rear corners, lid and all, in 65 seconds. The lights come on as it climbs, and the onyx window glows.

1850 wide560 deep1105 to 1925 tall, mm

The parts

  1. Lift and column guidesThe whole bar unit rises 820 mm straight up on two anodised column guides in the rear corners. Carriages on the unit ride the guides; the motor housing sits on the floor.
  2. The lidLeather fascia between square satin bronze end caps, rubber bumpers on top. It rises with the bar and stays level the entire time.
  3. Two lit shelvesBlack steel shelves with a perforated bronze back. Warm LED strips under the lid and under the upper shelf come on as the bar opens.
  4. Turning trayA round tray turns around the bronze centre column, for miniatures and shot glasses.
  5. Wine cradlePale wood saddles hold two bottles along the lower shelf, necks to the left.
  6. Crystal and tumblersFluted glasses hang upside down from a bronze rail; tumblers stand on black trays hung on bronze straps.
  7. Serving trayPale wood frame with a black insert, hinged at its back edge to fold down in front for the first pour.
  8. Honey onyx windowReal onyx in a rolled leather bezel, set in a tufted panel. Unlit while closed; the light behind it comes on as the bar opens.
  9. Bronze grid and railsSatin bronze strips framing the leather, two bronze tube rails on pewter brackets with ball ends.
  10. Sensor keyOn the left side panel. Moved from the lower slot to the upper slot, it sends the bar up.
  11. Safety stripA rubber edge under the lid. Closing stops the moment it touches anything.

Treasure Chest Vintage

No. 2 · SVG · Scissor lift coffee table

ROYAL TREASURE OF HIS MAJESTY THE KING OF SCOTCH LAND▲ TREASURE CHEST ▼

A coffee table in wire-brushed ash, its front corner cut away. Slide the key and a single scissor lift raises the lid and the bottle well 280 mm, perfectly level, in 25 seconds: spirits on both sides, wine in the rack, glasses hanging under the lid.

1150 wide510 deep650 to 930 tall, mm

The parts

  1. Scissor liftSteel scissor arms on a base plate with the motor housing. They raise the lid and the bottle well 280 mm, level.
  2. Bottle wellA brushed aluminium tray that rises with the lid, lit by a warm 2700 K LED strip under the lid's front edge.
  3. Wine rackStained pine, two by three. Bottles lie front to back with their necks to the front.
  4. Stemware railsAluminium rails under the lid. Glasses hang upside down between the bottles.
  5. The lidFlat wire-brushed ash with aged brass L brackets at the corners and round brass inlays on top, with a small no bar plate.
  6. Cast brass medallionA relief medallion centred on the front: Royal Treasure of His Majesty the King of Scotch Land.
  7. Sensor key plateA wood plate engraved TREASURE CHEST. The square key slides up to open, down to close, and pulls out to stop.
  8. Ash bodyWire-brushed ash panels with darker corner posts. A twisted brass ring handle on each side.
  9. Safety stripA rubber edge all round the lid underside, so the lid stops on contact while closing.